| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Item | Specification |
Dimensions without packaging (H x W x D) [mm(in.)] | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.) |
Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 454.0 mm (1.72 in. x 17.4 in. x 17.87 in.) | |
Dimensions with packaging (H x W x D) [mm(in.)] | 145 mm x 650 mm x 550 mm (5.71 in. x 25.59 in. x 21.65 in.) |
Chassis height [U] | 1 U |
Weight without packaging [kg(lb)] | 6.32 kg (13.93 lb) |
Weight with packaging [kg(lb)] | 8.22 kg (18.12 lb) |
Typical power consumption [W] | 30% traffic under the ATIS standard, dual power supplies: |
105 W (all ports used) | |
92 W (2 x 100GE ports not used) | |
Typical heat dissipation [BTU/hour] | 30% traffic under the ATIS standard, dual power supplies: |
358.27 (all ports used) | |
313.91 (2 x 100GE ports not used) | |
Maximum power consumption [W] | 100% traffic under the ATIS standard, dual power supplies, and without PoE: |
113 W (all ports used) | |
100 W (2 x 100GE ports not used) | |
Full PoE load, three 1000 W power modules: 3030 W (PoE: 2870 W) | |
Maximum heat dissipation [BTU/hour] | 100% traffic under the ATIS standard, dual power supplies, and without PoE: |
385.57 (all ports used) | |
341.21 (2 x 100GE ports not used) | |
Full PoE load, three 1000 W power modules: 10338.66 | |
Static power consumption [W] | 70 W |
MTBF [years] | 62.49 years |
MTTR [hours] | 1.92 hours |
Availability | > 0.99999 |
Noise at normal temperature (acoustic power) [dB(A)] | 30% PoE load: 52.70 dBA |
Noise at normal temperature (acoustic pressure) [dB(A)] | 30% PoE load: 40.7 dBA |
Number of card slots | 2 |
Number of power slots | 3 |
Number of fans modules | 2 |
Redundant power supply | 1+1+1 |
Pluggable AC and DC power modules can be used together in the same switch. | |
Long-term operating temperature [°C(°F)] | -5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.44 ft.) |
Short-term operating temperature [°C(°F)] | -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.) |
Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
The device can work for a short period of time when the operating temperature is beyond the normal range, but the following conditions must be met: | |
The operating temperature exceeds 45°C (113°F) for no more than 96 consecutive hours in a year. | |
The total time in which the operating temperature exceeds 45°C (113°F) in a year is less than or equal to 360 hours. | |
The number of times the operating temperature exceeds 45°C (113°F) is less than or equal to 15 in one year. | |
If any of the preceding conditions is not met, the device may be damaged or an unknown error may occur. | |
The device cannot start when the temperature is lower than 0°C (32°F). The maximum transmission distance of an optical module used for short-term operation cannot exceed 10 km. | |
When the QSFP-100G-ER4 or QSFP-100G-LR1 optical module is used, the operating temperature ranges from -5°C to +40°C (23°F to 104°F). | |
Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH (non-condensing) |
Long-term operating altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Power supply mode | Pluggable power supply |
Rated input voltage [V] | AC input: 100 V AC to 130 V AC, 200 V AC to 240 V AC; 50/60 Hz |
High-voltage DC input: 240 V DC | |
DC input: -48 V DC to -60 V DC |
){kind=link}